Smedley Aerial Lifts

Member Area
Scissor Lifts
Genie GS-4390 Scissor Lift


Built to tackle the most rigorous job site conditions

  • Large platform with durable diamond-plate aluminum flooring. A single 60 in (1.52 m) multi-position slide-out extension deck, on the front of the machine, comes standard. A second 48 in (1.22 m) slide-out extension deck, on the rear of the machine, is available as an option.
  • Rear platform railing can be removed for easier loading and unloading of materials.
  • Slide-out engine tray allows easy access to components.
  • Automatic leveling hydraulic outriggers are standard on the GS-5390 RT, optional on the GS-4390 RT.

Standard Features

  • GS-4390 has 49 ft (14.9 m) working height and GS- 5390 RT has 59 ft (18 m) working height
  • 1,500 lb (680 kg) load capacity
  • Positive traction-controlled four-wheel drive
  • 50% gradeability
  • Proportional drive
  • Two-speed lift functions
  • Troubleshooting diagnostics
  • Two self-closing entry gates
  • Foam-filled tires
  • AC wiring to platform
  • Descent alarm
  • Tilt sensor with an audible alarm
  • Horn
  • Hour meter

Specification Brochure
 
Genie GS-2646 Scissor Lift


Lifts Heavy Loads with Ease and Efficiency


Satisfies your heavy lifting requirements with ease and efficiency.
  • The solid steel deck platform has a slip-resistant surface.
  • Heavy duty guardrails fold down quickly without tools for increased accessibility.
  • Lubrication-free, service-free pivot points.
  • Built-in lanyard attachment points are provided.
  • The ergonomic Joystick Controller operates from the platform or the ground.
  • Low noise level allows operation in quiet work environments.
  • High angle steering provides excellent maneuverability.
  • Swing-out battery box and power module allow easy access to components.
  • Variable speed motor extends battery and motor life by using only the energy needed to do the required work.

Standard Features

  • 39 in (1 m) roll-out platform extension
  • Proportional controls for lift and drive functions
  • AC wiring to platform
  • Multiple disc brakes provide smooth deceleration
  • Manual platform lowering valve
  • Tilt sensor with an audible alarm
  • Pothole guards
  • Emergency stop switches at both platform and ground controls
  • Automatic 25 amp battery charger
  • Manual brake release
  • Non-marking tires
  • Hour meter

Specification Brochure
 
Genie GS-2632 Scissor Lift


Lift Heavy Loads with Ease and Efficiency


Its narrow width allows access in hard-to-reach spots. Fits through a standard doorway.
  • 90 degree steering provides zero turning radius and excellent maneuverability.
  • Single door access 32 in (81.3 cm)
  • On-board troubleshooting diagnostics notify the operators of fault conditions.
  • Variable speed motor extends battery and motor life by using only the energy needed to do the required work.
  • Weather resistant, impact resistant, molded Joystick Controller box operates from the platform or the ground.
  • The solid steel deck platform has a slip-resistant surface.
  • Heavy duty square steel guardrails fold down quickly without tools for single door access. Low noise level allows operation in quiet work environments.
  • Swing-out battery box and power module allow easy access to componentry.
  • Lubrication-free, service-free pivot points.

Standard Features

  • GS-2632 has 32 ft (9.92 m) working height
  • 39 in (1 m) roll-out platform extension
  • Compact 32 in (81.3 cm) width
  • 500 lb (227 kg) lift capacity
  • Proportional controls for lift and drive functions
  • Automatic 25 amp battery charger
  • Manual platform lowering valve
  • Emergency stop switches at both platform and ground controls
  • Drive speed interlock limits speed while elevated
  • Multiple disc brakes provide smooth deceleration
  • Manual brake release
  • Pothole guards
  • Non-marking tires
  • AC wiring to platform
  • Tilt sensor with an audible alarm
  • Beeper horn
  • Hour meter

Specification Brochure
 
Genie GS-2032 Scissor Lift


A stable, reliable and easy to operate lift with a built-in platform extension.

  • The solid steel deck platform has a slip-resistant surface.
  • Heavy duty square steel guardrails maximize durability.
  • Lubrication-free, service-free pivot points.
  • Built-in lanyard attachment points.
  • Weather resistant, impact resistant, injection-molded Joystick Carrier / Controller box operates from the platform or the ground.
  • Low noise level allows operation in quiet work environments.
  • High angle steering provides excellent maneuverability.
  • Swing-out battery box and power module allow easy access to componentry.
  • Variable speed motor extends battery and motor life by using only the energy needed to do the required work.
  • On-board troubleshooting diagnostics notify the operators of possible fault conditions.

Standard Features

  • 26 ft (8.1 m) working height
  • Compact 32 in (81 cm) width
  • 800 lb (363 kg) lift capacity
  • 39 in (1 m) rollout platform extension
  • Proportional controls for lift and drive functions
  • AC outlet to platform
  • Multiple disc brakes provide smooth deceleration

Specification Brochure
 
Genie GS-1930 Scissor Lift

Nothing beats a Genie Scissor for performance, safety, serviceability and value.


  • The solid steel deck platform has a slip-resistant surface.
  • Heavy duty tubular steel guardrails maximize durability. Telescopic end rail can be raised to accommodate large loads.
  • Lubrication-free, service-free pivot points.
  • Built-in lanyard attachment points.
  • The ergonomic Joystick Controller operates from the platform or the ground.
  • Low noise level allows operation in quiet work environments.
  • High angle steering provides excellent maneuverability.
  • Swing-out battery box and power module allow easy access to componentry. Variable speed motor extends battery and motor life by using only the energy needed to do the required work. On-board troubleshooting diagnostics notify the operators of possible fault conditions.

Standard Features

  • GS-1530 has 21 ft (6.5 m) working height and GS-1930 has 25 ft (7.8 m) working height
  • 39 in (1 m) roll-out platform extension
  • Compact 30 in (76 cm) width
  • 600 lb (272 kg) lift capacity for the GS-1530 and 500 lb (227 kg) lift capacity for the GS-1930
  • Compact design
  • Automatic 25 amp battery charger
  • Proportional controls for lift and drive functions
  • Multiple disc brakes provide smooth deceleration
  • Drive speed interlock limits speed while elevated
  • Emergency stop at both platform and ground controls
  • Manual platform lowering valve
  • Manual brake release
  • Pothole guards
  • Non-marking tires
  • AC wiring to platform
  • Tilt level sensor with an audible alarm
  • Beeper horn
  • Hour meter

Specification Brochure
 
JLG 3246ES Scissor Lift
Features
  • Quieter, cleaner operation for a variety of environments, both indoors and outdoors
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Tight turning radius for great maneuverability

Quick Specs
  • Platform Height Elevated – 31 ft 9 in
  • Overall Width – 46 in
  • Platform Capacity – 700 lb / 1,000 lb

Specification Brochure